Reasons for choosing fast doors
If you work in a harsh and unhygienic environment, it will affect human health, production efficiency and product quality. In order to enable the staff in the factory to work better, BNBDOOR recommends installing a fast door, which can not only ensure the constant temperature of the workshop, but also keep the workshop clean and hygienic.
The fast door runs at a speed of more than 0.6 meters per second, and is the main choice for many light industrial workshops to isolate and quickly enter and exit the clean workshop. This product can effectively isolate indoor dust, ensure constant temperature and humidity in the workshop, clean and hygienic, and play the role of heat preservation, moisture retention, sound insulation, insect prevention, dust prevention, and wind resistance. It is a must-have elevator door for factories engaged in food electronics, logistics, textiles, chemicals and other industries. The lifting speed of the fast door is very fast. The door opening sensor provides a trigger signal to the control system. The control system sends a command to the inverter according to the current position of the door, starts the drive motor to make the door rise quickly, and after the vehicle and pedestrian pass, the door automatically drops and closes the passage until the next door opening signal opens again.
The dust-free workshop has strict requirements for the working environment. Not only the staff's clothes should be clean, but also the machines and equipment should be kept dust-free. The materials of the goods should be kept free of dirt, and the environment should be kept fresh and free of pollution sources. As one of the purification equipment in the dust-free workshop, the fast rolling shutter door can play a lot of important roles in the entire workshop. BNBDOOR will tell you which ones are specific.
To maintain the cleanliness of the room, the dust-free workshop needs a large blower to increase the air pressure to ensure that dust cannot enter. In order to ensure the constant humidity and temperature, the cold air conditioner needs to be turned on. After the fast door is installed, the temperature and humidity of the indoor space can be effectively maintained, which helps to keep the room clean. The entrance and exit of the dust-free workshop have good sound insulation, dustproof and sealing effects, and basically prevent dust, mosquitoes, polluted gases, etc. in the air from entering the workshop. This is very important for the dust-free workshop. In addition, the product can also prevent indoor and outdoor air convection, which can effectively improve the workshop environment and hygiene problems.
In daily work, the product can continue to maintain a stable state without violent shaking. The switch is very smooth, fast and safe. From the appearance alone, it is more simple and elegant than other types of doors on the market, and the color can be selected by yourself.
The unique customized upgraded stainless steel door material is matched with PVC wear-resistant base cloth, which greatly reduces the rust rate. Even after long-term use, the whole door still looks beautiful, which also improves the overall appearance of the dust-free workshop.
It can be seen that the fast rolling shutter door is really very suitable for installation in dust-free workshops. Now basically most pharmaceutical companies and food companies basically require this product as a standard door for car-free workshops. If the company now wants to purchase good and durable products, then you can take a look at BNBDOOR. For detailed plans, please contact customer service.
