class 1 insulation rubber foam is the powerhouse of materials. It is soft, durable, flexible and highly resistant to a variety of hazards, including ozone, sunlight, oxidation, air, water and many chemicals. Even its colour does not show dirt easily and it maintains a clean appearance even when used. These properties make rubber foam suitable for a range of applications，it is widely used as heat and cold insulation material in industry and daily life,sports padding, and as a sound insulation solution where vibration suppression is required.
huamei contains other products and information you need, so please check it out.
Learn more and buy it
The conductivity factor is a very important index to measure the heat-insulation and cold-insulation effect of the heat-preservation material. The lower the conductivity factor is, the better the heat-insulation performance will be. The conductivity factor of this material is 0.034w/m• k at an average temperature 0 ℃ . Our class 1 rubber foam has high surface heat liberation rate, using the product with a thinner thickness can get the same heat preservation result as the traditional heat-preservation material at the same environmental conditions.When the rubber comes into contact with a cold object, it can slow down the propagation of the cold amount, thus maintaining the temperature of the object.So it also has a good cold insulation effect.
According to fie-proof regulations of building design and fie-proof regulations of higher living building, the heat-preservation material used in piping and equipment should adopt the fie-blocking or non-combustion materials. This material contains a lot of fie-blocking and smoking-reducing raw materials. The smoking concentration generated from fire is very low. It shall not be melted when touched with fire and no any burning balls will be fallen down. The material has self-extinguishing characteristic. The specification of Huamei class 1 rubber foam insulation product is better than the national standard which used for burning products of construction filds. The burning performance of the product is not lower than C grade according to GB- classifiation for burning behavior of building materials and products,ensuring safe and reliable
Distinguish between Class 0 and Class 1 flame retardant rubber foams
Huamei Class 1 Rubber Foam Insulation owes perfect aperture-closing foam structure, all apertures are independent each other. The nonconnected air bubble forms the closed air layer that can enhance the heat-insulation performance efficiently, meanwhile the independent aperture-closing structure of can form much hindrance to moisture, even if the surface of the material was damaged, It also can prevent the water vapor into the inner material, so that maintaining the long-term steady of the heat-insulation effect at the same condition; the conductivity factor of water is 24 times higher than air' s, while the non-aperture-closing structure is in reverse.
Huamei Brand Rubber Plastic Heat-Insulating & Heat-preservation Material has high elasticity, can reduce the vibration and resonate of the hot/cold water pipes in use in the largest degree.
Huamei Brand Rubber Foam insulation materials have good flexibility and tenacity which makes it easy to handle bent and irregular pipe in construction, saving both labor and material.
Because of the good softness, our class 1 rubber foam is easy to be installed.Tube Installing: The tubes can be installed after assembling or cut up them longitudinally and bind them with glue. With completed parts such as valve, three-way connection and elbow pipe, cut sheet material up and wrap those completed parts with the cut plate according to different shapes and then bind them together. That installing method guarantees the tightterial has smooth and straight surface as that of rubber and excellent performances, it is not needed to insert sealing layer or prevention layer, reducing the trouble in the construction and also guarantee that the installed appearance is beautiful and smooth. During the time of maintenance of equipment and pipe, the rest cut out from the material can be reused, which has the same performance.
Huamei Rubber Foam insulation Heat-Insulating & Heat-preservation Material can be used safely. Our products neither stimulate the skin nor harm health. The product can prevent mould from growing. They have excellent performance of acid-resisting and alkaliresisting. Because of those excellent performances, Huamei Rubber Foam insulation Heat-Insulating & Heat-preservation Material has become as an ideal heat-insulating and cold-insulating material to protect pipe and tubes against environmental corrosion.
Get a quote now
Class 1 rubber foam pipe
Class 1 rubber foam sheet
Click here to download detailed parameters
ItemRubber foam is used in a variety of applications. rubber foam is most commonly used in sports equipment and padding, insulation, caulking in masonry and concrete work, gaskets and sound insulation.
Rubber foam is usually produced when a gas blowing agent is applied to a liquid mixture, which may contain substances such as polyols, water and colouring agents or flame retardant additives. Eventually, through this process, the mixture cures into the familiar rubber foam.
Contact us to discuss your requirements of class 1 insulation rubber foam. Our experienced sales team can help you identify the options that best suit your needs.
Due to its molecular structure, rubber foam is a good insulator. It consists of small, closed pockets of gas. It is therefore difficult for air, water or sound to pass through it. When certain rubber foams are insulated with foam rubber, heat and cold air will have a hard time escaping through the walls, which helps to regulate the temperature as needed.
Of course, rubber foam is also a good cold insulator, it has low thermal conductivity and high resistance, is not easy to conduct heat, this characteristic can make it good heat insulation, of course, can also slow down the spread of cold, so that the object is kept at low temperature, play a good cold insulation effect. This property makes rubber play an important role in keeping objects cold and is widely used in industries such as cold chain transportation.
Rubber foam is used in a variety of applications. rubber foam is most commonly used in sports equipment and padding, insulation, caulking in masonry and concrete work, gaskets and sound insulation.
rubber foam high-quality foam is a soft, pliable and durable form-fitting foam rubber that provides good insulation and moisture resistance. It is resistant to ozone, sunlight, oxidation, many chemicals and petroleum derivatives. Neoprene is resistant to decomposition by water and air and can be insulated by virtue of its unique molecular structure.
Practical applications for rubber foam high-quality foam are in sports equipment such as gloves, waders, wetsuits and knee and elbow pads. In industrial production, it is used as insulation in masonry and concrete work, as expansion joint filler and as a filler support sealant in traffic-bearing joints. Neoprene high-quality foam can also be used as a sound barrier within or on the surface of walls, ceilings or floors, and is most effective when used as a component of a multi-story construction scheme.
We offer rubber foam sheets in a variety of sizes and thicknesses so that you can get the option that best suits your needs. We also offer rubber foam, which is thinner and ideal for more specialist projects. If our standard sizes do not meet the needs of your specific application, please contact us for more information on cutting rubber foam into custom sizes.
We can also offer a wide range of rubber foam material grades. This ensures that you always get the best material for your specific application. Common rubber foam grades include: conductive, high temperature and flame retardant.
rubber foam can utilize a variety of conversion tools and techniques to achieve the format and finish you require. We can supply all rubber foam materials, including sheets, rolls and strips. We also cut foam to the right size.
Custom cut rubber foam available!
We can cut high-quality rubber foam in custom sizes for any project you may have! Contact us for rubber foam details.
1. Low thermal conductivity: The thermal conductivity of flexible foam rubber materials is an important indicator of their insulation performance. The lower the thermal conductivity, the better the insulation performance. With an average temperature of 0℃, this material has a thermal conductivity of 0.034w/m.k. Despite its high surface heat dissipation coefficient, this product can achieve the same insulation effect as traditional insulation materials with a relatively thin thickness under the same external conditions.
2. Good flame retardancy: According to the "Building Design Fire Protection Code" and the "Fire Protection Design Code for High-rise Civil Buildings", non-combustible or difficult-to-burn materials should be used for insulation materials used in pipes and equipment. This material contains a large amount of flame retardant and smoke-reducing materials, which results in low smoke concentration during combustion. It does not melt when exposed to fire and does not produce flaming fireballs. The material has self-extinguishing characteristics. According to GB- "Combustion Performance Classification of Building Materials and Products", TECH-SHENZHOU Class 1 product indicators are far superior to the standards for building products in the field of combustion performance, which should not be lower than Class C. This ensures safety and reliability.
3. Good seismic performance: TECH-SHENZHOU flexible foam rubber insulation materials have high elasticity, which can minimize the vibration and resonance of chilled water and hot water pipes during use.
4. Closed-cell foaming and good moisture resistance: TECH-SHENZHOU flexible foam rubber materials have a complete closed-cell structure, with all the cells being independent and not interconnected, forming a sealed air layer. This effectively improves the insulation performance of the product. At the same time, the independent closed-cell structure of TECH-SHENZHOU flexible foam rubber materials can form multiple barriers to water vapor molecules, even if the surface of the material is damaged, it can prevent water vapor from penetrating into the interior of the material, thereby maintaining long-term stable insulation performance. Under the same conditions, the thermal conductivity of water is 24 times higher than that of air. Once the non-closed-cell structure material is damaged on the surface, water vapor can penetrate into the interior of the material, resulting in the loss of insulation effect.
5. Good flexibility: flexible foam rubber materials have good flexibility and toughness, making it easy to handle bending and irregular pipes during construction. It can also save labor and materials.
6. Easy installation and beautiful appearance: Due to the flexibility of this product, it is easy to install. For pipe installation, it can be installed by sliding it on or by cutting the pipe material longitudinally and then bonding it with adhesive. For complex components such as valves, tees, and elbows, the sheet material can be cut and wrapped in different shapes to ensure the tightness of the entire system and the insulation performance. The smooth and flat appearance of the material itself, as well as its excellent performance, eliminates the need for additional vapor barriers and protective layers, reducing construction troubles and ensuring a beautiful and flat appearance. When equipment or pipes need to be repaired, the peeled-off material can be reused without any change in performance.
Are you interested in learning more about glass wool with aluminium foil? Contact us today to secure an expert consultation!