The technology of sandwich panels production appeared due to American architects Frank Lloyd Wright and Alden B.Dow, who were the first to use it in their projects. Already in , the American company Koppers Inc. started mass production of sandwich panels. The oldest sandwich panels manufacturers in Europe are the Finnish company Rannila now known under the Ruukki brand, the Irish company Kingspan, and the Italian company Cannon.
Wiskind New Materials are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.
Sandwich panels possess good aesthetic properties, excellent energy saving characteristics, as well as can quickly assembled and thus are widely used for construction of trade and office buildings, prefabricated frame buildings, including warehouse complexes, industrial objects, and agricultural structures.
Depending on their use, sandwich panels are divided into wall and roof panels. In selecting sandwich panels, the key parameters are thermal, strength and fire protection.
Roof sandwich panels have to ensure full air-tightness and necessary roof strength, that is why it is recommended to use panels with special profile of external facing in the form of ridges.
The energy saving properties of sandwich panels are determined by the type of core, air-tightness of the lock and availability of seal in it.
The sealant can be polymer-based, installed at the time of panels installation, or EPDM (ethylene-propylene-diene-monomer) installed into panels’ lock during production, which ensures better air-tightness and energy efficiency of the sandwich panel lock.
A critical sandwich panels’ energy efficiency parameter is thermal resistance (R0), which takes account of heat losses in the lock part of the structure. The minimum reduced thermal resistance (at 25°C) for quality sandwich panels of leading European manufacturers is presented in the following table:
Panel thickness, mmThermal resistance R0, m2*K/WMineral woolFoamed polyurethane40–2.060–2..13..64..85..15..66..87..17..37..68..19..3–.8–Panels with thermal resistance below the mentioned parameters, are not recommended for usage in construction of energy efficient buildings.
Usage of modern cores, such as mineral wool and PIR, enable construction of buildings with even zero energy consumption. Construction of passive buildings and warehouses with regulated gas environment requires usage of technical solutions on sealing of all abutments, as well as application of sandwich panels with increased energy efficiency, allowing to almost completely exclude energy losses. A sandwich panels building structure can be considered energy efficiency, if its air-tightness comprises less than 1.5 m3/m2hour.
Sandwich panels with integrated photovoltaic modules (solar batteries) are the most innovational energy saving solutions.
The sandwich panel core (insulation layer) ensures such characteristics as durability, thermal and sound insulation, and fire protection properties.
Various types of cores are used in sandwich panels production; mineral wool, foamed polyurethane (PU) and its modification – polyisocyanurate foam (PIR, IPN), rigid polyurethane foam (PUR), as well as foamed polystyrene (plastic foam) are the most widespread.
Panels filled with foamed plastic, possess the worst operational characteristics, therefore, as a rule, they are used for construction of temporary structures having useful life of up to 10 years and no fire protection requirements, because foamed plastic is combustible. Apart from that, foamed plastic has low sound attenuation, gives rise to mold spreading and can be eaten by rodents. The only advantage of foamed plastic sandwich panels is their low price.
Being used in sandwich panels with increased fire rating requirements (up to EI360), for instance, in fireproof partitions. The mineral wool U-value varies within the range of λ=0.038-0.044 W/mK. Depending on the necessary characteristics, mineral wool of various density is used in the sandwich panels structure: low density (less than 90 kg/m3) – for internal partitions, medium density (95-115 kg/m3) – for external walls and roof panels, or increased density (120 kg/m3 and more) – for fireproof partitions and wall panels having increased bearing capacity. The mineral wool characteristics have caused wide usage of sandwich panels with such a core in construction of warehouses for combustible materials, fire-hazardous productions, as well as buildings with increased acoustic requirements.
Sandwich panels from foamed polyurethane are convenient in installation due to their small weight (in most cases, foamed polyurethane density in panels comprises from 32 to 40 kg/m3) and possess higher energy saving characteristics (λ=0.020-0.022 W/mK) compared to mineral wool.
Foamed polyurethane does not absorb moisture and thus can be successfully used in panels for carwashes, swimming-pools, productions with increased humidity (malt houses of breweries, mushroom farms etc.), as well as objects located close to bodies of water.
Sandwich panels with foamed polyurethane core are used at objects with low fire safety requirements, as well as at cold storages (refrigerators and freezers, including with regulated gas environment). In this case, polypropylene inserts have to be used on panel fixings to prevent from cold bridging and reduce heat losses.
It is worth noting that foamed polyurethane belongs to combustible materials (G1 combustibility group) and is flammable (M1-M1 group), while fire rating of sandwich panels with foamed polyurethane core is EI15.
Foamed polyisocyanurate (PIR) represents a new generation of polyurethane core (λ=0.020-0.022 W/mK) with fire rating up to EI60. E-PIR type foamed polyisocyanurate core has EI15-EI30 fire rating, while X-PIR – up to EI60.
IPN is a trademark of modified foamed polyurethane (λ=0.020-0.022 W/mK) used in Kingspan sandwich panels. In this case, IPN according to its characteristics more corresponds to X-PIR type, while IPN-L is close to E-PIR. A drawback of IPN is the absence of this type of core among those recommended in the European standard DSTU EN , which complicates confirmation of quality characteristics for products with such core and does not guarantee its long life.
The range of sandwich panels represented at the Ukrainian market, provides almost endless possibilities of creation of unique architecture. Rich colour solutions, variations in installation direction, a variety of types of profiles and décor enable an architect to use sandwich panels not only as structural, but also a design element of a building. To increase the architectural expressiveness of the building, almost any ventilated facade cladding can be additionally mounted on the external facing of sandwich panels.
Sandwich panels with polymer-coated steel facing can have standard (always available by manufacturers in their warehouses) and bespoke colours. The range of possible colour shades of panels is determined according to the RAL, RR, or NCS international colour standards.
Due to the complexity of technological processes, manufacturers of steel with an organic coating in metallic colors RAL and RAL do not guarantee the compatibility of color tones in future deliveries. Therefore, in order to ensure the uniformity of the color of sandwich panels, it is recommended to order the production of raw materials of the same color for the entire intended batch of products.
When selecting the colour of a sandwich panel, it is necessary to take account of the ability of metal having various colours to heat and expand, because this largely determines the long life and aesthetic characteristics of panels. The darker the colour is, the more the external facing is heated, therefore dark colours are not recommended for use on the roof, where panels would be heated stronger by the sun and might become wavy, while the facing can peel off from the core. It is also not recommended to install dark sandwich panels on the southern façade, because there panels can get bent, thus creating waves, especially if panels are over 6 m long.
The DSTU EN standard, which describes the requirements for sandwich panels, divides the colors of the cladding into 3 groups: very light, light and dark. The value of the outer skin temperature is set based on the group to which the color belongs and is +55 °C for very light colors, +65 °C for light colors and +80 °C for dark colors.
Color groups according to the influence of thermal loads on structures made of sandwich panels.
I color group – very light colorsRAL: , , , , , , , II color group – light colorsRAL: , , , , , , , , , , , , , , , , , , , , , , , , ,The outer sheathing of sandwich panels of dark colors (III color group) may be subject to distortion due to the increased thermal load compared to light colors. Therefore, when designing houses made of sandwich panels, it is necessary to take into account the features of dark panels and prevent damage using solutions based on the following conditions:
There exist several types of profiles of sandwich panel facing: microprofile, linear, corrugated, smooth, stamped, and sinusoid. Due to technical peculiarities of production, smooth and sinusoid surfaces are possible only for panels with foamed polyurethane core. For premises where it is necessary to exclude dust accumulation or where frequent washing is planned, panels with smooth or microprofile surfaces should be used for convenience.
Sandwich panels with smooth cladding should only be installed as single-span structures after static calculations using TrayPan software. The use of sandwich panels with smooth skins in other structures can lead to the appearance of waviness on the front surface. This can be a barely noticeable effect, visible only under certain conditions, for example, with very high insolation of a wall or roof structure.
The possible appearance of waviness on a smooth cladding does not impair the load-bearing capacity of sandwich panels, but may lead to deterioration of the aesthetics of the facade.
Sandwich panels can be installed horizontally, vertically or at a slope. It is allowed to use sandwich panels even for erection of curved walls, if the curve radius comprises 30 m or more. For even accommodation of panels deformation, it is recommended to install them in one span.
A series of leading sandwich panels manufacturers offer additional possibilities for their decoration, such as application of any colour images onto the surface of panels, or installation of ventilated façades with decorative lining above sandwich panels.
Apart from the external facing, visual perception of panels is also influenced by the fixing, which can be visible or hidden, as well as joint and framing elements, battens, special corner sandwich panels etc. Such seemingly insignificant details are decisive in the façade architecture of a series of objects. Therefore, if it is necessary to create an expressive building design, involvement of experienced specialists into project development is recommended.
The optimal choice of external facing material of sandwich panels is polymer-coated galvanized steel, ensuring long life and preservation of operational characteristics of a product.
A unique solution from Ruukki is sandwich panels with an external cladding made of Cor-Ten weathering steel, the use of which allows you to create energy-efficient and bright facade solutions that change their color over time. In addition, these sandwich panels are able to independently repair small scratches on the facing by forming a new patina.
Prior to purchasing sandwich panels, it is worth paying attention to the steel facing characteristics. Under DSTU EN , S250, S280 structural steel grades with flow limit 250-280 MPa can be used for manufacturing sandwich panels. In spite of that, to reduce the price, many producers use DX51 steel grade, which is not structural and thus not acceptable for non-bearing sandwich panels.
The same standard determines the need to use galvanized steel with zinc content not less than 190 g/m2. In this case, the zinc coating thickness from the external side shall be at least 13 microns, while the protective layer shall be at least 25 µm thick.
Under DSTU EN , the sandwich panels external facing thickness can be from 0.4 to 0.7 mm. In this case, the thicker a steel sheet is, the smoother the façade surface will look and the less glitter it will have in sunny weather. The internal facing layer is usually within 0.4 to 0.6 mm and affects the long life and bearing capacity of sandwich panels.
Depending on the use and operation conditions of panels, several types of polymer coatings are distinguished, of which the most widespread are:
In special cases, for instance, when the atmosphere inside the building is very aggressive due to influence of washing and abrasive detergents, as well as in pharmaceutical and food industries, it is recommended to use sandwich panels facing from stainless steel. Such a solution is the most expensive however the only possible one in certain cases.
Bearing capacity of a sandwich panel is an important characteristic, because in the course of operation panels are exposed to influence of snow, wind, seismic activity etc. When designing building envelopes using sandwich panels, it is necessary to take account of the requirements of DBN V.1.2-2 “Loads and Impacts”. For instance, for construction of the same building in various regions, the values of wind and snow loads can differ several times. It is also necessary to take account of the height and structural peculiarities, the specifics of the location, service loads, as well as the conditions of the building operation. For example, in addition to snow load, a roof has to withstand a person with a cleaning tool.
When wall sandwich panels are used in high-rise buildings, special attention can be paid to selection of fixings and number of fixing points.
In projects, where an explosive situation is possible, light removable structures need to be used. In such structures, sandwich panels with special types of fixings are applied, which ensure decompression of certain parts of the façade in case of internal pressure increase. This allows avoiding injuries to people, who are inside the premises and near the object, as well as damage to the building structures.
The necessary characteristics of sandwich panels are selected according to the bearing capacity tables and with the help of calculation software, therefore prior to purchasing, one should find out whether the supplier has such software.
The sandwich panel thickness is selected based according to thermal and strength calculations and can be within 40 to 300 mm, and its width is from 1.0 to 1.2 m. The panel length can be from 2 to 13.5 m and is limited by transportation possibilities. Based on convenience of installation, 6-8 m long panels are the most widespread.
Sandwich panels can be supplied with flat or zig-zag lock. Flat locks can cause condensate and through freezing. In its turn, the mortice and tenon zig-zag lock is more air-tight and energy efficient.
It is important to consider that precise geometrical characteristics of sandwich panels substantially affect the air-tight matching of locks, as well as the timing and quality of installation. In spite of the broad range of sandwich panels brands at the Ukrainian market, only a few manufacturers can guarantee that during installation, deviation from geometrical dimensions will be within the tolerances specified in DSTU EN . This is caused by the fact that manufacturing products with precise geometrical parameters requires high-quality automated equipment, which only leading European manufacturers have.
Before buying sandwich panels, you have to make sure that the supplier has a declaration of performance of building products, which is a mandatory document in accordance with Regulation (EU) № 305, which has been in force in Ukraine since January 1, .
The main standard in Ukraine for supplying sandwich panels is DSTU EN , which regulates the main characteristics of products and contains references to auxiliary standards according to which the supplier have to test the declared parameters.
Although the availability of a declaration of conformity is the only mandatory document for the sale of sandwich panels in Ukraine, the supplier may additionally provide other documents and services that allow the consumer to obtain extended information about product quality, simplify calculation & design, and reduce the cost of insurance for the facility:
According to DSTU V.2.7-169, the warranty period has to be at least 5 years. It is worth noting that leading manufacturers provide a sandwich panels guarantee for 5 years – for the integrity of the product, at least 25 years – for the effective operation of the core and up to 30 years – for the aesthetic properties of the facing.
When using sandwich panels in construction in areas of increased seismic activity, the supplier additionally have to provide a conclusion on seismic resistance.
For complete confidence in the quality of the supplied panels, it is also recommended to request separate certificates and protocols for the materials that were used in the production of a particular batch of panels: steel, core and glue.
Want more information on PU Sandwich Wall Panel? Feel free to contact us.
Before buying sandwich panels, it is important to know that even the best products, when using low-quality accessories or improper installation, are unlikely to last the declared period by the manufacturer. The choice of fixings, seals, battens, and rails, like the choice of sandwich panels themselves, has to be based on qualitative characteristics of products, peculiarities of a specific type of panels, and the manufacturer’s recommendations.
In spite of the seeming ease, sandwich panels installation is a rather complicated and responsible stage, which all subsequent operational costs and building useful life depend on. Therefore it is recommended to commission sandwich panels installation to experienced specialized construction companies, which are able to confirm their experience with the relevant warranty.
When storing mineral wool sandwich panels in the open air, the core can absorb moisture, as a result the thermal performance of the products can deteriorate significantly. To prevent the joint parts of sandwich panels from getting wet, the Finnish manufacturer Ruukki offers Rain Protect technology, which protects the insulation from rain during storage and maintains the panels quality.
Inexpensive sandwich panels with the lowest requirements to quality and long life, are represented in Ukraine by a broad list of brands, from which one can distinguish AluTherm, Arsenal, Asten, NTK, Pantec, Promstan, Gor-Stal, Izovol, Paneltech.
The medium price segment is filled with products by Adamietz, Arcelor, Balex, BP2, Brucha, Inteco, Isopan, Izopanel, Joris, Lindab, Metecno, Pruszynski, Romakowski, Tata, Termo-bud, TPK, Trimo, USP.
Sandwich panels of the highest quality in Ukraine, meeting the DSTU EN European quality standard, are represented by only two brands – Kingspan and Ruukki.
One should remember that the sandwich panels price means not only funds initially spent for manufacturing and installation. Purchasing better quality products, the building owner not only receives excellent appearance and safety of a building, but can recover the funds spent due to reduction of costs for heating and air conditioning, as well as due to absence of problems with operation of the roof and façades throughout the whole useful life of a building.
In Ukraine, there are many companies where you can buy sandwich panels from the producer. The most experienced supplier of sandwich panels is Rauta, which supplies products from the European sandwich panel factory Ruukki.
In an era where speed is the hallmark of achievement, sandwich panels shine as a smart and innovative choice in the world of construction. However, like other modern solutions, they come at a price. The elegant facade and attractive cost may conceal important details that could later become challenges affecting your entire project. Therefore, it's important to highlight not only their advantages, but also the disadvantages of sandwich panels, which can impact the project's efficiency and quality in the long run.
In this article, we won't sell you illusions. Rather, we'll reveal the flaws of sandwich panels in a clear and credible manner that will help you make an informed decision you won't regret. The difference between a sustainable project and one that collapses begins with the material you choose and the partner you rely on, like Myco.
Read also: Fire-resistant sandwich panels - Maico
When engineering intelligence meets the need for speed and efficiency, sandwich panels emerge as one of the most prominent modern construction solutions. They are not just metal panels, but an integrated system consisting of two outer metal layers separated by a high-performance insulating core.
Sandwich panels are also lightweight and easy to install, making them a preferred choice for hangars, warehouses, insulated rooms, and even temporary and permanent buildings. It's a solution that saves time and reduces labor costs without compromising on insulation or quality.
However, just as every building material has advantages, it also has disadvantages that cannot be ignored. We will learn about the disadvantages of sandwich panels in detail below.
Despite the numerous advantages of sandwich panels, their use is not without its challenges. Some defects may not be apparent at first glance but become more apparent over time or with improper use.
These disadvantages vary depending on the manufacturing quality, installation method, and type of insulation used. In the following paragraphs, we will review the most prominent disadvantages of sandwich panels in a simple and straightforward manner, to help you make a more informed decision when choosing this material for your projects.
Read also : Myco Sandwich Panel Catalog: Your Smart Guide to Choosing the Best
Not all sandwich panels are equal in quality. Some cheaper types do not provide adequate insulation, allowing heat or sound to escape into the building. This results in energy loss and increased noise levels, negatively impacting comfort and heating or cooling efficiency.
If panels are not properly coated or treated, they are susceptible to corrosion over time, especially in areas with high humidity or close to the sea. This threatens the integrity of the structure and reduces its lifespan, especially if they are not coated with an anti-rust layer.
Don't fall for cheap prices. Myco offers sandwich panels that meet European quality standards, backed by advanced protective layers to resist moisture and harsh conditions. Contact us through the following:
In industrial applications or harsh environments, some panels may not withstand shocks or heavy loads due to their light weight. They are susceptible to damage or denting during improper storage, transportation, or installation, which can lead to deformations in the exterior appearance and reduced weather resistance.
Any mistake in sandwich panel installation could lead to problems such as leaks, poor insulation, or even structural damage, which would require costly maintenance later on. Therefore, choose professional technicians for this step from the outset. This is where Myco comes in with its distinguished team, known for its sandwich panel installation expertise.
After the panels are installed, making any design modifications such as additional ventilation or electrical openings becomes complicated and may damage the structure.
Due to the nature of sandwich panels, it is difficult to make modifications such as installing electrical or air conditioning after installation, which requires careful planning in advance.
Therefore, it requires careful planning from the beginning. With Myco, you're in safe hands. They don't just sell, they provide a comprehensive installation service with a trained team that ensures quality implementation from start to finish.
One of the major drawbacks of sandwich panels is their high initial cost, as they require significant investment in materials and manufacturing. Although they offer speedy completion, their initial cost may be higher than some traditional building materials.
This poses a challenge for projects with limited budgets, especially when high-quality materials are required. However, don't forget that they save on insulation and maintenance costs in the long run.
Not every technician or contractor has sufficient experience in sandwich panel installation. Despite the availability of materials, the lack of trained technicians can affect the quality of installation, highlighting the importance of choosing a company with experience in the field.
A lack of qualified personnel can lead to unsatisfactory results and structural problems in the future. This is where Myco's strengths shine once again. Not only do they provide high-quality panels, but they also guarantee a dedicated team covering all phases of the project, from design to implementation.
Read also: Sandwich Panel Dimensions | Specifications - Uses
Avoiding sandwich panel defects doesn't mean abandoning them, but rather understanding them well and choosing the right type according to your project's requirements:
· Know the source, i.e. do not trust any product without approved sandwich panel specifications or a quality certificate.
· Rely on technicians with real installation experience, because most problems come from installation errors, not from the material itself.
You must choose the type of insulation appropriate for the nature of the place. Polyurethane is not like rock wool, and each has a specific function.
· Don't neglect regular maintenance, especially in humid or weather-prone environments.
Treat your sandwich panel like a long-term investment, one that starts with conscious choice and succeeds with careful monitoring.
In a market filled with options and tempting offers, Myco stands out not only as a sandwich panel supplier, but as a reliable partner at every step of your project. Its products are manufactured according to the highest European standards and undergo rigorous testing to ensure insulation, strength, and resistance to climate conditions.
Most importantly, Myco doesn't sell you a product and then end the relationship. Instead, it provides technical support before, during, and after installation, protecting your investment from costly mistakes. Its experience with large and diverse projects means it knows exactly what you need. If you're looking for security, trust, real results, and world-class sandwich panel specifications, Myco is the right place.
In the world of modern construction, it is not enough to choose the fastest or cheapest material, but you must choose it with full awareness of its details, advantages, and disadvantages.
Sandwich panels may seem like an ideal option on paper, but they can become a real burden if they are not installed professionally, or if they are of poor quality.
Therefore, a smart decision doesn't just mean asking about price, but also about quality, performance, and longevity. This is precisely where the difference between a mere supplier and a company like Myco becomes apparent. Myco understands your project as much as it understands the importance of details, and provides you with a product that is worthy of your trust and that stands the test of time.
Read also : Sandwich panel sales companies - how to choose and search for the best ones
Can the sandwich panel be modified after installation?
Yes, the sandwich panel can be modified after installation, but it depends on the type of modification required.
Some simple modifications such as adding vents or installing new additions may be possible without having to remove the panels completely,
However, major modifications such as structural redesign or location change may require removing and reinstalling panels, which can result in additional costs.
Is sandwich panel suitable for all types of projects?
Sandwich panels are a flexible option suitable for many projects, such as industrial buildings, warehouses, and commercial centers. However, they may not be suitable for all applications, especially in projects that require superior thermal or sound insulation or high resistance to environmental factors.
Therefore, specific project needs and site conditions must be considered before making a final decision.
How do I ensure that the sandwich panel I buy is of high quality?
To verify the quality of the sandwich panel, you must start by examining the materials used in its manufacture, such as the type of rock wool or polyurethane used as insulation.
Panels must be made of rust- and corrosion-resistant materials to ensure longevity. It is also preferable to choose reliable suppliers who are well-known in the market and have recognized quality certifications.
If you want to learn more, please visit our website Sandwich Panel Roof.