Click here to get more.
If you want to learn more, please visit our website ABOSN.
Plastic is a controversial material and often the subject of many environmental debates. We hire three forms of construction matting. As well as our aluminum construction matting, we also supply ground protection mats and Tufftrack mats, both of which are made from high-density polyethylene (HDPE).
Many issues surrounding plastic lie with low-density polyethylene (LDPE) or single-use plastics as they're commonly known.
Of all LDPE, mostly used in consumer packaging and throwaway items, only a very small amount of what is produced is recycled. The recycling process is more complex, and this form of plastic must be recycled separately.
'It can take between 500 and 1,000 years for LDPE to biodegrade.'
' Businesswaste.co.uk
HDPE however, carries a less controversial label because of its strong structure. It is long-lasting. It is easier to recycle and used again and again as a different product, and carries a slightly higher recycling rate.
Surprisingly, HDPE plastic uses less energy and less material in its production than its alternatives. By using alternatives to HDPE we could produce more greenhouse gas emissions. This helps us to promote sustainable construction sites.
Sometimes, we have to assess the environmental impact of a product by looking at its reusability. A product with more versatility in its uses has a lower carbon footprint.
The hire price of HDPE plastic construction matting can remain lower, as it is cheaper to make. This also makes them a lower risk of theft as opposed to aluminium construction mats which are very expensive and attract a high scrap value.
Of course, plastic is water resistant and can survive adverse weather conditions, damp terrains and wet conditions. Thus, perfect for outdoor work. It is also less likely to bevel and dint, like metal, which can cause the build-up of water.
The flexibility of HDPE plastic construction matting allows it to follow the contours of the undulating surface, providing better coverage and protection. Certain surfaces require this as opposed to alluminium matting.
HDPE plastic construction matting is much lighter weight than many of its alternatives. This means it is easier for workers to lift without causing injury and it decreases fuel consumption for goods transport. Additionally, it causes fewer injuries on site.
One of the main problems with materials and equipment used outdoors is rust.
'Corrosion and wear costs the UK approximately £80 billion per annum.'
ABOSN Product Page
For more hdpe matsinformation, please contact us. We will provide professional answers.
' A study from the University of Edinburgh
Plastic construction matting will never rust, albeit, is the perfect solution to this costly problem.
Not only is this good for the material and lifespan of plastic, but construction matting but also is a selling point to clients. If you are providing construction matting for an outdoor event in summer, that is going to be subject to days or weeks of sunlight then this is an ideal USP.
Plastic is wipeable and most importantly to us'jetwash-able! We can spray off all dirt and also debree very efficiently. They also dry extremley fast too. This means they pose limited bacteria risks.
If you are considering working with HDPE sheets — otherwise known as high-density polyethylene sheeting, which is commonly used in many different industries — you are going to want to understand the benefits of working with this material.
1. Lightweight
First, HDPE is a very lightweight material. That means you can make products solely out of HDPE that won't weigh much. Or you can use it in combination with other products as well and keep the overall weight of the combined products low. This is a good way to manage the overall weight of your products.
2. Highly Malleability
Second, HDPE is a very malleable material. It can be molded in many different ways. That means you can customize the material to fit your specific needs. You can use this material to make just about any item you can think of.
3. Weatherproof
Third, HDPE is a very weatherproof material. It can withstand being exposed to freezing temperatures, as well as really hot temperatures. Additionally, it can be exposed to lots of moisture without rotting or molding, or rusting. That means you can leave the material outside or exposed to the weather without having to worry about the material being damaged in any way.
4. Long-Lasting
Fourth, HDPE is a long-lasting material. Not only can it withstand all types of weather, but it can also withstand exposure to a wide range of chemicals without breaking down or being compromised. It can also withstand high levels of impact without the material's shape being compromised. HDPE can last longer than many traditional materials, so if you want your product to have a longer lifespan, using HDPE is one way to achieve that goal.
5. Sustainable
Finally, HDPE is also a sustainable material, as it can be recycled and turned into other plastic products. If you are trying to create more sustainable products, using HDPE is one material that can help you achieve that goal. When your product reaches the end of its life, it can easily be recycled into something else.
Contact us to discuss your requirements of Hockey Dasher Boards. Our experienced sales team can help you identify the options that best suit your needs.